Measuring tank top.

Measuring a tank top shirt can be a tricky under taking. If you need to know how to measure a tank top, then you have come to the right place. Sometimes you need to get your tank top measurements to make sure that a tank top will fit properly before purchasing. With a little guidance, you can accurately make tank top measurements.
When you prepare to take the tank top measurements, make sure that the surface you are placing the tank top on is smooth and clean such as a table. It’s not recommended to use a fabric covered surface as a measuring surface. Lay your tank top flat on the surface, smooth out all the wrinkles, and make sure it is face up. Don’t stretch out the shirt because it will interfere with an accurate measurement.
Measure the body width by measuring from side-to-side starting one inch below the bottom of the armhole seam. Then measure the body length by measuring from the high point of the shoulder strap down to the bottom hem edge. Next, measure the armhole length. Start by folding the garment at the center front, and center back by matching the seams on top of each other. Lay the neck bindings on top of each other. Smooth them to form a straight edge, but not stretched.
When measuring the neck opening, start by measuring from the center of the back of the neck fold to the center of the front of the neck fold at the top edge of binding. This measurement will need to be doubled to get the total length. In order to measure the front neck drop, you will need to measure from the center of the back of the collaret to the body seam. To measure the binding width, you can begin by measuring from the fold edge of the binding at the binding to the body seam. You should make several measurements which should be taken from around the neck to verify the uniformity of the binding. Be sure to check the measurements from the neck to the armhole binding.
It is important to get an accurate measurement across the shoulders. Begin by measuring in a straight line from the strap to strap at the outer binding edges. To measure the shoulder width, measure in a straight line from the strap edge to the strap edge at the top.
When measuring the bottom hem you should measure for the fold edge of the hem to the first stitch line. Be sure to measure this one several times to insure the measurement is accurate. Next, begin measuring across the front by measuring seven inches down from the shoulder seam. Measure it horizontally across the front of the chest of the shirt. Next, measure across the back by turning the shirt face down. Also measure it seven inches down from the shoulder seam. Measure it horizontally across the back of the shirt.
By making all of the above measurements, you should have of the measurements you need for accurate tank top measurement comparison. Be sure to double check your measurements to make sure that you will get a good fit from a tank top when you are comparing your measurements to the prospective tank top. Make sure that you have followed tank top fit guide properly because it can really make a difference when you want to balance comfort and style.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s